SIP Broker

To use SIP Broker with a Sipura/Linksys (all models, including 1000, 2000, PAP2-NA (but NOT PAP2 unless it's been unlocked), 3000, 841) ATA follow these instructions:

Setup Steps:

1. Setup your SPA 3000 according to your provider's instructions.
2. Using a Web browser, access the admin login page for the ATA.
3. Select the "switch to advanced view" link, and then select the Line 1 link.

   

4. Scroll down to the Dial Plan section and use one of the following:

   Generic Dial Plan

   L:20,S:7,( x | [x*][x*]. <:@sipbroker.com> | <#:>[x*][x*]. )

   U.S. Dial Plan

   L:20,S:7,( x | 1[2-9]xx[2-9]xxxxxxS0 <:@sipbroker.com>>| [x*][x*]. <:@sipbroker.com> | <#:>[x*][x*]. )

   NOTE: To force the call out via your registered VoIP provider, bypassing SIP Broker, just start the call with the # key.

   You can also speed up call completion by pressing # after you're done dialing a phone number (almost like the 'Send' button on a cell phone).

5. Congratulations, you have completed the initial setup of your ATA. To test your setup, simply call:

   *011-1-88888

   You should hear the SIP Broker announcement. If you don't, re-check the above settings. In the event that you are still having difficulties, please consult our Support Forum.

6. You are now ready to dial and receive calls.

See the FAQ for a full description of the supported SIP Broker calling methods.